Bearings for Cashew Processing
A cashew factory fights one substance all day: CNSL, the dark, sticky, caustic liquid inside the shell. It coats cutters, conveyors and anything near the shelling section — including the bearings. Add steam from the cooker, heat from the borma dryers and fine dust from peeling, and you have one of the hardest places in food processing for a bearing to survive.
Coastal Karnataka is cashew country. Factories across Dakshina Kannada and Udupi can together process around 2.5 lakh tonnes of raw cashew a year — far more than the state grows — so many units run long seasons on imported nuts too. If you own or run a cashew unit, this guide walks through the factory step by step: which bearings sit where, what wears them out, and which spares keep the line moving.

Why cashew factories are hard on bearings
CNSL. The shell liquid is sticky and caustic. It gums up seals and housings and makes cleaning hard.
Steam and moisture. Boilers and cookers fill the area with steam; kernels are humidified after drying.
Heat. Borma dryers and cookers run hot, and nearby fans and drives run hot too.
Dust. Shell dust, testa (skin) and fine kernel powder settle on every machine.
Long runs. With imported nuts, many units run most of the year.
Step by step: where the bearings sit:
Raw nut cleaning and sizing
Raw nuts are cleaned and sized first, because shelling works best on uniform nuts. Rotary drum graders and vibrating sieves run on pillow block bearings, with reversing loads on the vibrating ones. Raw nut dust and grit get into everything.
Boiler and steam cooker
The boiler feeds steam to batch cookers or continuous drum cookers. Boiler feed pumps, fans, and any rotating cooker drums run in heat and steam. High-temperature, water-resistant grease and sealed bearings matter here.
Related reading: Pump Bearing Guide · High-Temperature Bearings
Shelling machines
This is where CNSL causes the most trouble. Hand-and-pedal cutters have few bearings, but automatic shelling machines are full of them — in blade drives, feed conveyors, cam mechanisms and motors. CNSL and shell fragments get onto shafts and seals all day.
What helps:
Sealed bearings (2RS) wherever CNSL can reach.
Regular cleaning of housings and shafts — don't let CNSL build up and harden.
Fresh grease on schedule. New grease pushes contamination out of the seal.
Shell and kernel separation
Vibrating separators and blowers separate kernels from broken shell. Blower bearings run fast in dust; vibrating deck bearings take reversing loads.
Borma dryers
Shelled kernels are dried in borma dryers — hot-air ovens with fans and sometimes trolleys or rotating trays. Fan bearings run hot for hours at a time and need grease rated for heat.
Humidification and peeling
After drying, kernels are humidified to loosen the testa, then peeled — by hand, with pneumatic peelers, or with rotary peeling machines. Pneumatic peelers depend on compressors and blowers; rotary peelers have drums and drives. Fine testa dust and moisture together clog bearings.
Grading, sorting and packing
Grading machines (vibrating and rotary), colour sorters and vacuum or nitrogen packing machines run on small bearings, cams and conveyors. Kernel dust is fine but oily, and it packs into housings.
CNSL extraction
Many units recover CNSL from the shells with a screw expeller. Like an oil expeller, its worm shaft pushes hard against a thrust bearing, which carries the most load in the machine — in a hot, oily environment.
Related reading: Spherical Roller Thrust Bearings · Motor Bearing Guide
Don't forget the belts and pulleys
Cashew machines are mostly belt-driven. Keep V-belts at the right tension, replace worn ones as a set, and check pulley alignment after every bearing change. Kashyap supplies Fenner V-belts, pulleys, universal gumboot couplings and bearing grease alongside bearings.
Seven warning signs to act on
Hard, black CNSL build-up around a bearing housing.
A shelling machine that cuts unevenly or jams more than usual.
A borma dryer fan that's noisy, hot or shaking.
A peeler compressor or blower that sounds rougher than before.
Grease that looks milky, burnt or gritty.
Grader or separator vibration that has changed.
Heat or noise at the gearbox end of the CNSL expeller.
Spares worth keeping
Bearings for each automatic shelling machine model.
Borma dryer fan bearings.
Peeler compressor and blower bearings.
Grader and conveyor pillow blocks.
The CNSL expeller thrust bearing, if you extract CNSL.
A written list of every bearing number in the factory.
Buying bearings that last
Match the full number, including seal type and any high-temperature or clearance suffix.
Choose sealed bearings near shelling and peeling.
Buy genuine. Fake bearings in copied boxes are a real problem in India — SKF India has raided traders selling counterfeit SKF cartons and duplicate hologram stickers. In a food factory, a failing fake bearing is a hygiene risk as well as a breakdown. Ask for a proper GST invoice.
Can't read the number? Send us a photo of the bearing, or the machine type and maker, and we'll work out the right part with you before anything ships.
What to do now
Walk your factory and list the bearing numbers on your shelling machines, borma fans, peelers and graders. Keep a spare set for the shelling machine you depend on most.
Kashyap Bearing and Mill Stores has supplied bearings and mill spares from SP Road, Bangalore since 1987 — sealed and high-temperature bearings, pillow blocks, thrust bearings, V-belts, pulleys and grease — and we serve customers across Karnataka, including Mangaluru and Udupi. Send us your bearing numbers, a photo or your machine details and we'll confirm the right replacement before it ships. You can also get a quick figure from our bearing price calculator or request a quote through the quotation generator.
📍 #11/1 SP Road, Bangalore 560002
📞 94485 16463 / 89513 22259
💬 WhatsApp us a photo of the bearing or your machine details. We'll confirm the right replacement before it ships.
Frequently Asked Questions on Bearings for Cashew Processing:
1. Which bearings are used in cashew processing machines?
Cashew factories use pillow block bearings on graders, separators and conveyors, sealed ball bearings in automatic shelling machines, heat-rated bearings in borma dryer fans and cooker drives, compressor and blower bearings for pneumatic peelers, and a thrust bearing in the CNSL expeller. Exact sizes depend on the machine maker, so read the old bearing number or send a photo.
2. Why do bearings fail in cashew shelling machines?
CNSL, the sticky and caustic liquid inside the shell, coats shafts and seals during shelling and builds up around housings. Combined with shell fragments, steam and long running hours, it shortens bearing life. Sealed bearings, regular cleaning of CNSL build-up and fresh grease on schedule help most.
3. Which bearings are used in a borma dryer?
Borma dryers circulate hot air with fans, so the main bearings are the fan and motor bearings. They run hot for long periods and need grease rated for high temperature, often with C3 clearance. Some bormas also have bearings on trolleys or rotating trays. Check the fan bearings regularly for noise, heat and vibration.
4. What spare bearings should a cashew factory keep?
Keep bearings for each automatic shelling machine model, borma dryer fan bearings, peeler compressor and blower bearings, grader and conveyor pillow blocks, and the CNSL expeller thrust bearing if you extract CNSL. A written list of every bearing number in the factory makes reordering quick.
5. Where can I buy cashew machine bearings in Mangaluru or Udupi?
Kashyap Bearing and Mill Stores at #11/1 SP Road, Bangalore 560002 has supplied bearings and mill spares since 1987 and serves customers across Karnataka, including Mangaluru and Udupi. Send the bearing number or a photo on WhatsApp at 94485 16463, and the team will confirm the correct replacement before it ships.




Comments