top of page

Bearings for Flour Mills

Writer: sociocon20
sociocon20
3 days ago
7 min read

Whether it's a single atta chakki in a neighbourhood shop or a roller flour mill turning out maida and sooji by the tonne, the business runs on the same thing: shafts that turn all day without trouble. And every one of those shafts sits on bearings.

This guide is for flour mill owners and chakki owners. It covers which bearings sit where, the bearing sizes commonly listed for atta chakkis, what wears them out, and why a hot bearing in a flour mill is more than a maintenance problem.


Bearings for Flour Mills


Why flour mills are hard on bearings

Flour looks soft. To a bearing, it isn't.

  • Fine dust everywhere. Flour and bran dust are fine enough to pass a worn seal and turn grease into a stiff paste.

  • Heat from grinding. Stones and rolls heat up as they grind, and that heat flows straight into the shaft and bearings.

  • Heavy belt load. Chakkis and roller mills are mostly belt-driven. An over-tight belt loads the bearing nearest the pulley all day.

  • Long hours. Many mills and chakkis run from morning to night, every day. Small problems get no time to cool down.

The good news: most flour mill bearings are standard deep groove ball bearings, spherical roller bearings and pillow blocks. With the right seals, grease and belt tension, they last.

Atta chakkis: the bearing sizes commonly listed

The atta chakki — stone type or bolt type, vertical or horizontal — is the most common flour mill in India. Its main shaft usually runs on two deep groove ball bearings, often shielded (ZZ) to keep flour out.

One Indian machine seller lists these bearing sizes for its chakkis:

  • 10-inch stone type: 6205ZZ, two pieces, on a 25 mm shaft.

  • 16–18 inch horizontal stone and bolt types: a 6206 / 6209 pair.

  • 16–18 inch vertical stone type: 6208.

  • 24–30 inch horizontal bolt type: a 6212 / 6208 pair, on a 45–60 mm shaft.

Use these as a guide only. The same size of chakki from different makers can use different bearings, and even one seller's listings don't always agree. Always read the number off the bearing you take out — or send us a photo and we'll match it.

Why chakki bearings fail

  1. Stones set too tight. Grinding too fine heats the stones and cooks the bearings.

  2. Over-tight belts. The bearing on the pulley side usually goes first.

  3. Flour in the bearing. Once a shield is damaged, flour packs in and the bearing runs dry and hot.

  4. Old or wrong grease. Grease that has hardened with flour dust no longer lubricates.

  5. Loose housing. A bearing that spins in a worn housing wears both out.

  6. Fake bearings. A cheap unbranded bearing in a chakki that runs all day rarely lasts.

Roller flour mills: section by section

A roller flour mill has many more machines. Here's where the bearings sit.

Wheat cleaning section

Separators, destoners, scourers and dampeners clean and condition the wheat before milling. Vibrating separators take repeated shock through their drive bearings; scourers run fast with a heavy rotor. Most run on pillow block bearings and self-aligning bearings.

Roller mills

The roller mill is the heart of the plant. Pairs of chilled iron rolls turn towards each other at different speeds, breaking and grinding the wheat step by step. The roll shafts run in heavy roller bearings in their housings — spherical roller or cylindrical roller bearings, depending on the maker — and they carry both the grinding pressure and the belt or gear drive load.

Roller mill bearings need:

  • The exact bearing the maker specifies, because roll gap accuracy depends on it.

  • Clean grease and good seals, because flour dust is right at the shaft.

  • Temperature checks. Some modern roller mills even have sensors on the bearing supports to catch rising temperature from wear.

Plansifters

The plansifter is a huge stack of sieves that swings in a circle to separate flour by size. That whole swinging mass is driven by an eccentric drive running on large bearings — often spherical roller bearings — that carry a heavy, constantly moving load. A worn plansifter drive bearing shows up as rough motion, noise and uneven sifting.

Purifiers, detachers and finishers

Purifiers vibrate to sort semolina; detachers and bran finishers spin fast to break up flakes and clean bran. They use smaller bearings, but high speed and fine dust make good sealing important.

Bucket elevators, conveyors and pneumatic lines

Product moves between floors by bucket elevator, screw conveyor or air. That means pillow blocks at every elevator head and boot, bearings in every screw conveyor, and fast-running blowers and rotary airlocks under the cyclones — all working in flour dust.

Motors

Every machine is driven by a motor, and every motor runs on deep groove ball bearings. See our motor bearing guide.

A hot bearing in a flour mill is a fire risk

This is the part many owners don't think about. Flour dust burns. Suspended in the air inside a bucket elevator, duct or bin, it can even explode.

Industry sources list overheated bearings as one of the main ignition sources inside bucket elevators. A well-greased bearing normally runs well below the temperature that ignites grain dust. When the grease fails, heat can build fast, and a bearing that breaks apart can throw sparks.

In the United States, the grain handling safety rule requires bearings inside elevator legs to be mounted outside the casing or monitored for temperature or vibration. Whatever your local rule, the lesson is the same:

  • Check elevator and conveyor bearings by touch or thermometer on a regular round.

  • Replace a hot or noisy bearing now, not at the end of the week.

  • Keep housings clean of flour build-up, which traps heat.

  • Don't rely on temperature alone. One flour mill caught a failing slow-speed line shaft bearing through vibration while its temperature still looked normal.

Don't forget the belts, pulleys and couplings

Chakkis and roller mills are belt-driven machines. Belts and bearings fail together:

  • Keep V-belts at the right tension — tight enough not to slip, no tighter.

  • Replace multi-belt drives as matched sets.

  • Check pulley alignment after every bearing change.

  • Look at the motor coupling. A worn gumboot (tyre) coupling passes misalignment into both bearings.

Kashyap supplies Fenner V-belts, pulleys, universal gumboot couplings and bearing grease alongside bearings.

Seven warning signs to act on

  1. A bearing housing too hot to keep your hand on.

  2. A new growl, rumble or knock from a chakki, roller mill or plansifter.

  3. Flour quality changing — coarser or uneven — with no change in settings.

  4. Grease coming out dark, hard or full of flour.

  5. A belt that keeps slipping or squealing.

  6. A plansifter swinging roughly or noisily.

  7. An elevator that slows or jerks under load.

Buying bearings that last

  • Match the full number, including the ZZ or 2RS suffix and any C3 clearance.

  • Choose shielded or sealed bearings wherever flour dust reaches the shaft.

  • Check the housing. A new bearing in a worn housing won't last.

  • Buy genuine. Fake bearings in copied boxes are a real problem in India — SKF India has raided traders selling counterfeit SKF cartons and duplicate hologram stickers. In a machine that runs all day, a fake bearing fails fast. Ask for a proper GST invoice.

Can't read the number? Send us a photo of the bearing, or the chakki size and make, and we'll work out the right bearing with you before anything ships.

What to do now

Write down the bearing numbers on every chakki or machine in your mill and keep one spare set for the machine you can least afford to have stopped.

Kashyap Bearing and Mill Stores has supplied bearings and mill spares from SP Road, Bangalore since 1987 — deep groove bearings for chakkis, spherical roller bearings, pillow blocks, V-belts, pulleys, gumboot couplings and grease. Send us your bearing numbers, a photo or your machine details and we'll confirm the right replacement before it ships. You can also get a quick figure from our bearing price calculator or request a quote through the quotation generator.

📍 #11/1 SP Road, Bangalore 560002

📞 94485 16463 / 89513 22259

đź’¬ WhatsApp us your chakki size or a photo of the bearing. We'll confirm the right replacement before it ships.

Frequently Asked Questions on Bearings for Flour Mills:

1. Which bearing is used in an atta chakki?

Most atta chakkis run their main shaft on two deep groove ball bearings, usually shielded (ZZ). Sizes listed by one Indian seller include 6205ZZ for a 10-inch stone chakki, 6206 and 6209 for 16–18 inch models, 6208 for vertical stone types and 6212 with 6208 for 24–30 inch bolt types. Makers differ, so read the number off the old bearing before buying.

2. Why does my chakki bearing get hot?

The usual causes are stones set too tight, an over-tight belt, flour dust packed into the bearing, old or hardened grease, or a bearing spinning in a worn housing. A hot bearing wears out quickly and can be a fire risk in a dusty mill, so stop and check it rather than running on.

3. Which bearings are used in a roller flour mill?

Roller flour mills use heavy spherical or cylindrical roller bearings on the roll shafts, large bearings in the plansifter eccentric drive, pillow block and self-aligning bearings in the cleaning section, elevators and conveyors, and deep groove ball bearings in motors, blowers and detachers. Use the bearing the machine maker specifies for roll and plansifter positions.

4. Can a hot bearing cause a fire in a flour mill?

Yes. Flour and grain dust are combustible, and overheated bearings are listed among the main ignition sources inside bucket elevators. A well-greased bearing runs well below dust ignition temperature, but a dry or failing one can heat up fast or throw sparks. Regular temperature and noise checks, clean housings and prompt replacement reduce the risk.

5. Where can I buy flour mill and chakki bearings in Bangalore?

Kashyap Bearing and Mill Stores at #11/1 SP Road, Bangalore 560002 has supplied bearings and mill spares since 1987, including deep groove bearings for chakkis, spherical roller bearings, pillow blocks, V-belts, pulleys and grease. Send the bearing number or a photo on WhatsApp at 94485 16463, and the team will confirm the correct replacement before it ships.

 
 
 

Comments


bottom of page